首次尝试在 CentOS 7.9 上静默安装 Oracle 11G 失败，卡在监听启动一直没反应；最后一次尝试 12C 成功了。。。
先给出成功记录
参考：
注意
在安装中没有选择图形安装，因为VNC配置很麻烦，尝试使用MOBAXTERM，结果不知道是网络延迟的原因，操作需要1-2分钟才能反馈回来，不能忍受的折磨，于是选择静默安装。其实道理是一样的，就是参数设置。
备份一下 db_install.rsp：
# vim /data/oracle/db_install.resp
# 关键修改内容如下：
ORACLE_HOSTNAME=oracle12c # 注意这里要跟你的hostname一致，如果不存在，请手动添加 host
oracle.install.option=INSTALL_DB_SWONLY # 只安装数据库软件，之后我们会手动创库
UNIX_GROUP_NAME=oinstall
INVENTORY_LOCATION=/data/oracle/oraInventory
ORACLE_HOME=/data/oracle/app/product/12.2.0/dbhome_1
ORACLE_BASE=/data/oracle/app
oracle.install.db.InstallEdition=EE # 安装Enterprise Edition
oracle.install.db.OSDBA_GROUP=dba
oracle.install.db.OSOPER_GROUP=dba
oracle.install.db.OSBACKUPDBA_GROUP=dba
oracle.install.db.OSDGDBA_GROUP=dba
oracle.install.db.OSKMDBA_GROUP=dba
oracle.install.db.OSRACDBA_GROUP=dba
DECLINE_SECURITY_UPDATES=true
oracle.install.db.config.starterdb.characterSet=AL32UTF8 # 字符编码设置
oracle.install.db.config.starterdb.memoryLimit=16384 # 内存使用设置，这里你需要根据实际情况，oracle一般是 40%的整个内存
oracle.install.db.config.starterdb.type=GENERAL_PURPOSE
oracle.install.db.config.starterdb.password.ALL=oracle # 设置所有用户的密码都为oracle
oracle.install.db.config.starterdb.storageType=FILE_SYSTEM_STORAGE
oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=/data/oracle/oradata # 设置文件存储位置
oracle.install.db.config.starterdb.enableRecovery=true # 是否开启恢复分区，根据情况设置
oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=/data/oracle/app/ecovery_area安装语句有小小变动，一直说未达到预设置标准：
screen -S oracle # 这里使用screen 避免安装到一半网络中断等异常情况导致安装中断
/data/oracle/installer/database/runInstaller -ignorePrereqs -waitforcompletion -silent -responseFile /data/oracle/db_install.rsp初始化建库也一样，没啥还说的。 可以愉快的学习 Oracle 啦，开心。
同时也感谢其他博主的资料：
CentOS 7 命令行静默安装部署oracle11g数据库
以下为失败尝试记录，感谢互联网的踩坑资料
1. 环境准备
CentOS 7.9
Oracle 11G R2安装包
SSH：Alacritty
2. 初始化参数
下载 Oracle 安装包
- 本地的 11G 安装包上传到 /usr/local/src 目录下。下载地址（推荐使用pikpak下载，上传可使用 Cyberduck）
检查硬件需求
grep MemTotal /proc/meminfo查看系统物理内存grep SwapTotal /proc/meminfo查看交换空间大小11G 要求最小内存 1GB RAM
虚拟内存容量：Reference
- Between 1GB and 2GB：1.5 times the size of RAM
- Between 2GB and 16GB：Equal to the size of RAM
- More than 16GB: 16GB
糟糕，我的swapspace就是0，重新设置吧：
sudo swapoff -a # 关闭swapsudo dd if=/dev/zero of=/swapfile bs=1M count=2048# bs指的是Block Size，就是每一块的大小。这里的例子是1M，意思就是count的数字，是以1M为单位的。count是告诉程序，新的swapfile要多少个block。这里是1024，就是说，新的swap文件是5G大小。sudo mkswap /swapfile #把增大后的文件变为 swapfilesudo swapon /swapfile #重新打开cd and vi /etc/fstab #swap启动时自动生效，加上这行命令/swapfile swap swap default 0 0# 保存退出，可以再检查swap大小
检查当前发行版本，安装依赖包
cat /etc/redhat-release改成
redhat-7需要如下安装包：
# binutils-2.23.52.0.1-12.el7.x86_64# compat-libcap1-1.10-3.el7.x86_64# gcc-4.8.2-3.el7.x86_64# gcc-c++-4.8.2-3.el7.x86_64# glibc-2.17-36.el7.i686# glibc-2.17-36.el7.x86_64# glibc-devel-2.17-36.el7.i686# glibc-devel-2.17-36.el7.x86_64# ksh# libaio-0.3.109-9.el7.i686# libaio-0.3.109-9.el7.x86_64# libaio-devel-0.3.109-9.el7.i686# libaio-devel-0.3.109-9.el7.x86_64# libgcc-4.8.2-3.el7.i686# libgcc-4.8.2-3.el7.x86_64# libstdc++-4.8.2-3.el7.i686# libstdc++-4.8.2-3.el7.x86_64# libstdc++-devel-4.8.2-3.el7.i686# libstdc++-devel-4.8.2-3.el7.x86_64# libXi-1.7.2-1.el7.i686# libXi-1.7.2-1.el7.x86_64 libXtst-1.2.2-1.el7.i686# libXtst-1.2.2-1.el7.x86_64# make-3.82-19.el7.x86_64# sysstat-10.1.5-1.el7.x86_64对照一个一个包检查吧：
rpm -q install binutils compat-libcap1 gcc gcc-c++ glibc glibc glibc-devel glibc-deverpm -q packageoryum install -y package一起安装：
sudo yum install -y binutils compat-libcap1 gcc gcc-c++ glibc glibc glibc-devel glibc-devel ksh libaio libaio libaio-devel libaio-devel libgcc libstdc++ libstdc++ libstdc++-devel libstdc++-devel libXi libXi libXtst libXtst sysstat
创建文件夹
整体思路: Oracle的安装目录以及数据存储目录
# 安装 Oracle 数据库的目录 sudo mkdir -p /data/oracle/product/11.2.0 # Oracle 数据库配置文件目录 ；oracle会将数据库的版本、注册等信息写入到此文件中 sudo mkdir -p /data/oracle/oraInventory # Oracle 安装包的目录 sudo mkdir -p /data/oracle/oradata sudo mkdir -p /data/oracle/fast_recovery_area #检查是否创建成功 ll /data/oracle/
创建用户组
整体思路：为啥要创建三个用户组呢？参考
# 创建用户组 oraclesys dba ；可执行关键的数据库管理任务，如创建数据库、启动和关闭实例。sudo groupadd osysdba# 创建用户组 oraclesys oinstall ；拥有对 Oracle 中央清单 (oraInventory) 的写入权限。sudo groupadd oinstall# 创建用户组 oraclesys oper ； 成员拥有一组有限的数据库管理权限，如管理和运行备份sudo groupadd osysoper# 创建oracle用户，并加入到oraclesysoinstall用户组sudo useradd -g oinstall -G osysdba,osysoper oracle# 设置oracle用户的登陆密码，需要确认一次，注意两次密码要一样(注意：此处的密码是linux端oracle用户登录密码)sudo passwd oracle# 查看创建用户的组权限id oracle# uid=1000(oracle) gid=1001(oraclesysoinstall) groups=1001(oraclesysoinstall),1000(oraclesysdba),1002(oraclesysoper)chown -R oracle:oinstall /data/oraclechmod -R 755 /data/oracle进入 data 目录授权给刚刚创建的 oracle 用户
#sudo chown -R oracle:oinstall /data/oracle/product/11.2.0#sudo chown -R oracle:oinstall /data/oracle/oraInventory#sudo chown -R oracle:oinstall /data/oracle/database
修改 OS 系统标识
# CentOS --> Redhat vi /etc/redhat-release # 加入 redhat-7开放 Firewalld 端口和禁用selinux
检查防火墙状态
systemctl status firewalld.service永久开放1521端口
firewall-cmd --permanent --zone=public --add-port=1521/tcp重启firewalld及禁用selinux
systemctl restart firewalldsetenforce 0提示：如需保持selinux禁止状态：
vim /etc/selinux/config# This file controls the state of SELinux on the system.# SELINUX= can take one of these three values:# enforcing - SELinux security policy is enforced.# permissive - SELinux prints warnings instead of enforcing.# disabled - No SELinux policy is loaded.SELINUX=disabled # change it here! 表示禁用selinux策略# SELINUXTYPE= can take one of three two values:# targeted - Targeted processes are protected,# minimum - Modification of targeted policy. Only selected processes are protected.# mls - Multi Level Security protection.SELINUXTYPE=targeted
配置内核参数
vim /etc/sysctl.confnet.ipv4.icmp_echo_ignore_broadcasts = 1net.ipv4.conf.all.rp_filter = 1fs.file-max = 65536 # fs.file-max 最大打开文件数fs.aio-max-nr = 1048576kernel.shmall = 2097152 # kernel.shmall 共享内存的总量，8G内存设置：2097152*4k/1024/1024kernel.shmmax = 1677721 # kernel.shmmax 最大共享内存的段大小，一般设置为服务器的80%内存总大小kernel.shmmni = 4096kernel.sem = 250 32000 100 128net.ipv4.ip_local_port_range = 1024 65000 # net.ipv4.ip_local_port_range 可使用的ipv4端口范围net.core.rmem_default = 262144net.core.rmem_max= 262144net.core.wmem_default= 262144net.core.wmem_max= 262144#更改生效sudo /sbin/sysctl -p修改用户使用资源限制
sudo vi /etc/security/limits.conf # 加上参数 oracle soft nproc 2047 #oracle soft nproc 单个用户可用进程数软限制 oracle hard nproc 16384 #oracle hard nproc 单个用户可用进程数硬限制 oracle soft nofile 1024 #oracle soft nofile 打开文件描述符软限制 oracle hard nofile 65536 #oracle hard nofile 打开文件描述符硬限制 oracle soft stack 10240 # 接着在文件/etc/pam.d/login中修改 sudo vi /etc/pam.d/login # 加上参数 session required /lib/security/pam_limits.so session required pam_limits.so #最后在/etc/profile添加 if [ $USER = “oracle” ];then if [ $SHELL = “/bin/ksh”];then ulimit -p 16384 ulimit -n 65536 else ulimit -u 16384 -n 65536 fi fi #使命令生效 source /etc/profile配置用户环境变量
vim /home/oracle/.bash_profile #其实跟切到oracle用户再改 ~/.bash_profile 道理一样 # 加上参数 # oracle数据库安装目录 export ORACLE_BASE=/data/oracle # oracle数据库路径 export ORACLE_HOME=/data/oracle/product/11.2.0 # oracle启动数据库实例名 export ORACLE_SID=orcl export ORACLE_TERM=xterm # 添加系统环境变量 export PATH=$PATH:$ORACLE_HOME/bin # 添加系统环境变量 export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib # 防止安装过程出现乱码 export LANG=C # 设置Oracle客户端字符集，必须与Oracle安装时设置的字符集保持一致 export NLS_LANG="AL32UTF8" export NLS_DATE_FORMAT='yyyy-mm-dd hh24:mi:ss' # 重加载环境变量 source /home/oracle/.bash_profile解压安装包并授权
sudo yum install -y unzip zip cd /usr/local/src unzip linux.x64_11gR2_database_1of2.zip -d /data/oracle unzip linux.x64_11gR2_database_2of2.zip -d /data/oracle chown -R oracle:oinstall /data/oracle修改响应模版（静默安装的答题册）
# 复制响应文件模板 mkdir /data/oracle/res cp /data/oracle/database/response/* /data/oracle/res chown -R oracle:oinstall /data/oracle # 设置响应文件权限 sudo chmod 700 /data/oracle/res/*.rsp一步一步设置响应文件
vim /data/oracle/res/db_install.rsp # 安装类型 oracle.install.option=INSTALL_DB_SWONLY # 主机名称（hostname查询） ORACLE_HOSTNAME=fond # 安装组 UNIX_GROUP_NAME=oinstall # INVENTORY中央库存目录（不填就是默认值） INVENTORY_LOCATION=/data/oracle/oraInventory # 选择语言 SELECTED_LANGUAGES=en,zh_CN,zh_TW # oracle_home ORACLE_HOME=/data/oracle/product/11.2.0 # oracle_base ORACLE_BASE=/data/oracle # oracle版本 oracle.install.db.InstallEdition=EE # 自定义安装，否，使用默认组件 oracle.install.db.isCustomInstall=false # dba用户组 oracle.install.db.DBA_GROUP=osysdba # oper用户组 oracle.install.db.OPER_GROUP=osysoper # 数据库类型 oracle.install.db.config.starterdb.type=GENERAL_PURPOSE # globalDBName oracle.install.db.config.starterdb.globalDBName=orcl # SID oracle.install.db.config.starterdb.SID=orcl # 自动管理内存的内存(M) oracle.install.db.config.starterdb.memoryLimit=81920 # 设定所有数据库用户使用同一个密码 oracle.install.db.config.starterdb.password.ALL=123456 #（手动写了false） SECURITY_UPDATES_VIA_MYORACLESUPPORT=false # 设置安全更新（貌似是有bug，这个一定要选true，否则会无限提醒邮件地址有问题，终止安装。） DECLINE_SECURITY_UPDATES=true #完全版 #################################################################### ## Copyright(c) Oracle Corporation 1998,2008. All rights reserved.## ## ## ## Specify values for the variables listed below to customize ## ## your installation. ## ## ## ## Each variable is associated with a comment. The comment ## ## can help to populate the variables with the appropriate ## ## values. ## ## ## ## IMPORTANT NOTE: This file contains plain text passwords and ## ## should be secured to have read permission only by oracle user ## ## or db administrator who owns this installation. ## ## ## #################################################################### #------------------------------------------------------------------------------ # Do not change the following system generated value. #------------------------------------------------------------------------------ oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0 #------------------------------------------------------------------------------ # Specify the installation option. # It can be one of the following: # 1. INSTALL_DB_SWONLY # 2. INSTALL_DB_AND_CONFIG # 3. UPGRADE_DB #------------------------------------------------------------------------------- oracle.install.option=INSTALL_DB_SWONLY #------------------------------------------------------------------------------- # Specify the hostname of the system as set during the install. It can be used # to force the installation to use an alternative hostname rather than using the # first hostname found on the system. (e.g., for systems with multiple hostnames # and network interfaces) #------------------------------------------------------------------------------- ORACLE_HOSTNAME=crunchagain #------------------------------------------------------------------------------- # Specify the Unix group to be set for the inventory directory. #------------------------------------------------------------------------------- UNIX_GROUP_NAME=oraclesysoinstall #------------------------------------------------------------------------------- # Specify the location which holds the inventory files. #------------------------------------------------------------------------------- INVENTORY_LOCATION=/home/oracle/oraInventory #------------------------------------------------------------------------------- # Specify the languages in which the components will be installed. # # en : English ja : Japanese # fr : French ko : Korean # ar : Arabic es : Latin American Spanish # bn : Bengali lv : Latvian # pt_BR: Brazilian Portuguese lt : Lithuanian # bg : Bulgarian ms : Malay # fr_CA: Canadian French es_MX: Mexican Spanish # ca : Catalan no : Norwegian # hr : Croatian pl : Polish # cs : Czech pt : Portuguese # da : Danish ro : Romanian # nl : Dutch ru : Russian # ar_EG: Egyptian zh_CN: Simplified Chinese # en_GB: English (Great Britain) sk : Slovak # et : Estonian sl : Slovenian # fi : Finnish es_ES: Spanish # de : German sv : Swedish # el : Greek th : Thai # iw : Hebrew zh_TW: Traditional Chinese # hu : Hungarian tr : Turkish # is : Icelandic uk : Ukrainian # in : Indonesian vi : Vietnamese # it : Italian # # Example : SELECTED_LANGUAGES=en,fr,ja #------------------------------------------------------------------------------ SELECTED_LANGUAGES=en,zh_CN,zh_TW #------------------------------------------------------------------------------ # Specify the complete path of the Oracle Home. #------------------------------------------------------------------------------ ORACLE_HOME=/oracledata/data/oracle/product/11.2.0.1 #------------------------------------------------------------------------------ # Specify the complete path of the Oracle Base. #------------------------------------------------------------------------------ ORACLE_BASE=/oracledata/data/oracle #------------------------------------------------------------------------------ # Specify the installation edition of the component. # # The value should contain only one of these choices. # EE : Enterprise Edition # SE : Standard Edition # SEONE : Standard Edition One # PE : Personal Edition (WINDOWS ONLY) #------------------------------------------------------------------------------ oracle.install.db.InstallEdition=EE #------------------------------------------------------------------------------ # This variable is used to enable or disable custom install. # # true : Components mentioned as part of 'customComponents' property # are considered for install. # false : Value for 'customComponents' is not considered. #------------------------------------------------------------------------------ oracle.install.db.isCustomInstall=false #------------------------------------------------------------------------------ # This variable is considered only if 'IsCustomInstall' is set to true. # # Description: List of Enterprise Edition Options you would like to install. # # The following choices are available. You may specify any # combination of these choices. The components you choose should # be specified in the form "internal-component-name:version" # Below is a list of components you may specify to install. # # oracle.rdbms.partitioning:11.2.0.1.0 - Oracle Partitioning # oracle.rdbms.dm:11.2.0.1.0 - Oracle Data Mining # oracle.rdbms.dv:11.2.0.1.0 - Oracle Database Vault # oracle.rdbms.lbac:11.2.0.1.0 - Oracle Label Security # oracle.rdbms.rat:11.2.0.1.0 - Oracle Real Application Testing # oracle.oraolap:11.2.0.1.0 - Oracle OLAP #------------------------------------------------------------------------------ oracle.install.db.customComponents=oracle.server:11.2.0.1.0,oracle.sysman.ccr:10.2.7.0.0,oracle.xdk:11.2.0.1.0,oracle.rdbms.oci:11.2.0.1.0,oracle.network:11.2.0.1.0,oracle.network.listener:11.2.0.1.0,oracle.rdbms:11.2.0.1.0,oracle.options:11.2.0.1.0,oracle.rdbms.partitioning:11.2.0.1.0,oracle.oraolap:11.2.0.1.0,oracle.rdbms.dm:11.2.0.1.0,oracle.rdbms.dv:11.2.0.1.0,orcle.rdbms.lbac:11.2.0.1.0,oracle.rdbms.rat:11.2.0.1.0 ############################################################################### # # # PRIVILEGED OPERATING SYSTEM GROUPS # # ------------------------------------------ # # Provide values for the OS groups to which OSDBA and OSOPER privileges # # needs to be granted. If the install is being performed as a member of the # # group "dba", then that will be used unless specified otherwise below. # # # ############################################################################### #------------------------------------------------------------------------------ # The DBA_GROUP is the OS group which is to be granted OSDBA privileges. #------------------------------------------------------------------------------ oracle.install.db.DBA_GROUP=oraclesysdba #------------------------------------------------------------------------------ # The OPER_GROUP is the OS group which is to be granted OSOPER privileges. #------------------------------------------------------------------------------ oracle.install.db.OPER_GROUP=oraclesysoper #------------------------------------------------------------------------------ # Specify the cluster node names selected during the installation. #------------------------------------------------------------------------------ oracle.install.db.CLUSTER_NODES= #------------------------------------------------------------------------------ # Specify the type of database to create. # It can be one of the following: # - GENERAL_PURPOSE/TRANSACTION_PROCESSING # - DATA_WAREHOUSE #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.type=GENERAL_PURPOSE #------------------------------------------------------------------------------ # Specify the Starter Database Global Database Name. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.globalDBName=orcl #------------------------------------------------------------------------------ # Specify the Starter Database SID. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.SID=dbsrv2 #------------------------------------------------------------------------------ # Specify the Starter Database character set. # # It can be one of the following: # AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2, # EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257, # BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6, # AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8, # IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE, # KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950, # ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258 #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.characterSet=AL32UTF8 #------------------------------------------------------------------------------ # This variable should be set to true if Automatic Memory Management # in Database is desired. # If Automatic Memory Management is not desired, and memory allocation # is to be done manually, then set it to false. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.memoryOption=true #------------------------------------------------------------------------------ # Specify the total memory allocation for the database. Value(in MB) should be # at least 256 MB, and should not exceed the total physical memory available # on the system. # Example: oracle.install.db.config.starterdb.memoryLimit=512 #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.memoryLimit=61440 #------------------------------------------------------------------------------ # This variable controls whether to load Example Schemas onto the starter # database or not. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.installExampleSchemas=false #------------------------------------------------------------------------------ # This variable includes enabling audit settings, configuring password profiles # and revoking some grants to public. These settings are provided by default. # These settings may also be disabled. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.enableSecuritySettings=true ############################################################################### # # # Passwords can be supplied for the following four schemas in the # # starter database: # # SYS # # SYSTEM # # SYSMAN (used by Enterprise Manager) # # DBSNMP (used by Enterprise Manager) # # # # Same password can be used for all accounts (not recommended) # # or different passwords for each account can be provided (recommended) # # # ############################################################################### #------------------------------------------------------------------------------ # This variable holds the password that is to be used for all schemas in the # starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.ALL=xxzx0124 #------------------------------------------------------------------------------- # Specify the SYS password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.SYS= #------------------------------------------------------------------------------- # Specify the SYSTEM password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.SYSTEM= #------------------------------------------------------------------------------- # Specify the SYSMAN password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.SYSMAN= #------------------------------------------------------------------------------- # Specify the DBSNMP password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.DBSNMP= #------------------------------------------------------------------------------- # Specify the management option to be selected for the starter database. # It can be one of the following: # 1. GRID_CONTROL # 2. DB_CONTROL #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.control=DB_CONTROL #------------------------------------------------------------------------------- # Specify the Management Service to use if Grid Control is selected to manage # the database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.gridcontrol.gridControlServiceURL= #------------------------------------------------------------------------------- # This variable indicates whether to receive email notification for critical # alerts when using DB control. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.dbcontrol.enableEmailNotification=false #------------------------------------------------------------------------------- # Specify the email address to which the notifications are to be sent. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.dbcontrol.emailAddress=elios.space@gmail.com #------------------------------------------------------------------------------- # Specify the SMTP server used for email notifications. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.dbcontrol.SMTPServer= ############################################################################### # # # SPECIFY BACKUP AND RECOVERY OPTIONS # # ------------------------------------ # # Out-of-box backup and recovery options for the database can be mentioned # # using the entries below. # # # ############################################################################### #------------------------------------------------------------------------------ # This variable is to be set to false if automated backup is not required. Else # this can be set to true. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.automatedBackup.enable=false #------------------------------------------------------------------------------ # Regardless of the type of storage that is chosen for backup and recovery, if # automated backups are enabled, a job will be scheduled to run daily at # 2:00 AM to backup the database. This job will run as the operating system # user that is specified in this variable. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.automatedBackup.osuid= #------------------------------------------------------------------------------- # Regardless of the type of storage that is chosen for backup and recovery, if # automated backups are enabled, a job will be scheduled to run daily at # 2:00 AM to backup the database. This job will run as the operating system user # specified by the above entry. The following entry stores the password for the # above operating system user. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.automatedBackup.ospwd= #------------------------------------------------------------------------------- # Specify the type of storage to use for the database. # It can be one of the following: # - FILE_SYSTEM_STORAGE # - ASM_STORAGE #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.storageType= #------------------------------------------------------------------------------- # Specify the database file location which is a directory for datafiles, control # files, redo logs. # # Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.fileSystemStorage.dataLocation= #------------------------------------------------------------------------------- # Specify the backup and recovery location. # # Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation= #------------------------------------------------------------------------------- # Specify the existing ASM disk groups to be used for storage. # # Applicable only when oracle.install.db.config.starterdb.storage=ASM #------------------------------------------------------------------------------- oracle.install.db.config.asm.diskGroup= #------------------------------------------------------------------------------- # Specify the password for ASMSNMP user of the ASM instance. # # Applicable only when oracle.install.db.config.starterdb.storage=ASM_SYSTEM #------------------------------------------------------------------------------- oracle.install.db.config.asm.ASMSNMPPassword= #------------------------------------------------------------------------------ # Specify the My Oracle Support Account Username. # # Example : MYORACLESUPPORT_USERNAME=metalink #------------------------------------------------------------------------------ MYORACLESUPPORT_USERNAME= #------------------------------------------------------------------------------ # Specify the My Oracle Support Account Username password. # # Example : MYORACLESUPPORT_PASSWORD=password #------------------------------------------------------------------------------ MYORACLESUPPORT_PASSWORD= #------------------------------------------------------------------------------ # Specify whether to enable the user to set the password for # My Oracle Support credentials. The value can be either true or false. # If left blank it will be assumed to be false. # # Example : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true #------------------------------------------------------------------------------ SECURITY_UPDATES_VIA_MYORACLESUPPORT=false #------------------------------------------------------------------------------ # Specify whether user wants to give any proxy details for connection. # The value can be either true or false. If left blank it will be assumed # to be false. # # Example : DECLINE_SECURITY_UPDATES=false #------------------------------------------------------------------------------ DECLINE_SECURITY_UPDATES=true #------------------------------------------------------------------------------ # Specify the Proxy server name. Length should be greater than zero. # # Example : PROXY_HOST=proxy.domain.com #------------------------------------------------------------------------------ PROXY_HOST= #------------------------------------------------------------------------------ # Specify the proxy port number. Should be Numeric and atleast 2 chars. # # Example : PROXY_PORT=25 #------------------------------------------------------------------------------ PROXY_PORT= #------------------------------------------------------------------------------ # Specify the proxy user name. Leave PROXY_USER and PROXY_PWD # blank if your proxy server requires no authentication. # # Example : PROXY_USER=username #------------------------------------------------------------------------------ PROXY_USER= #------------------------------------------------------------------------------ # Specify the proxy password. Leave PROXY_USER and PROXY_PWD # blank if your proxy server requires no authentication. # # Example : PROXY_PWD=password #------------------------------------------------------------------------------ PROXY_PWD=
3.正式安装
# 先重启系统，保证配置重新生效
sudo reboot
# 接着登录到oracle用户
# 进入解压后的data目录
cd /data/oracle/database
# 运行安装
./runInstaller -silent -ignorePrereq -responseFile /data/oracle/res/db_install.rsp
# 接下来需要等一会儿，时间略长，出现提示信息后安装成功，告知要新开会话用root用户执行脚本
####（这一步很重要） 新开会话切换用户root或者其他用户可以用sudo的，我的就是用sudo的，根据提示输入两个脚本：
sudo /home/oracle/oraInventory/orainstRoot.sh
sudo /oracledata/data/oracle/product/11.2.0.1/root.sh
# 然后切回原会话按Enter即可
# 检查完善环境变量
vim ~/.bash_profile
export ROACLE_PID=ora11g
netca /silent /responseFile /data/oracle/res/netca.rsp
vim /data/oracle/res/dbca.rsp
dbca -silent -responseFile /data/oracle/res/dbca.rsp
lsnrctl status
SID_LIST_LISTE=
(SID_LIST=
(SID_DESC=
(GLOBAL_DBNAME=orcl)
(ORACLE_HOME=/data/oracle/product/11.2.0)
(SID_NAME=orcl)
)
)